dual mag
Magnetite isn’t just a domestic issue. In fact, the bigger the system, the bigger the problem. Our commercial filters are designed to protect heating/cooling systems.
dual mag, Central heating and cooling magnetic filter, protecting heating/cooling components from the damaging effects of sludge and debris. The dual design provides an opportunity to capture all impurities in two times of contact with the same magnet.
thanks to it’s design, it can be installed even vertical or horizontal.
dual mag is one of most powerful magnetic filters in the world, suitable for both cooling and heating in hydronic systems.
Owner Benefits:
- Minimum 12% annual saving on cooling/heating bills
- wide range of sizes
- Vertical or Horizontal installation possibility
- Increases system lifespan
- Retains sludge, rust and magnetite
- Collects all impurities
- Fight corrosion and stop further corrosion in the system
- 5 Years Warranty
Installer Benefits
- Available in 1″, 1,1/4″, 1, 1/2″, 2″ and DN40, DN50
- Supplied with open/close wrench for magnetic cap and drain plug.
- Simple installation and servicing
- Equipped with air vent with the security spring system.
- vertical and horizontal installation.
- Construction conforms to Pressure Equipment Directive 97/23/EC
Technical Specification
Casing | stainledd steel 304L |
---|---|
drain Cap | G1/2, male |
Maximum working pressure | 10 bar |
Working temperature range | 0 to 100 degree of Celcius |
ring Seal | Silicone |
Magnet | Neodymium REN52 B=12000 Gauss B(max T) / B(room T)<1% (max T=120°C, Room T=20.5°C) Tested according to ASTM A977 regulations |
Compatible fluid | Water, Water+Glycol |
Operation noise | 0 db(A) According to EN13443 |