dual mag plus

Magnetite isn’t just a domestic issue. In fact, the bigger the system, the bigger the problem. Our commercial filters are designed to protect heating/cooling systems.

dual mag plus, Central heating and cooling magnetic filter, protecting heating/cooling components from the damaging effects of sludge and debris. The dual design provides an opportunity to capture all impurities in contact with all length magnet.

thanks to it’s design, it can be installed even vertical or horizontal.

dual mag plus is one of most powerful magnetic filters in the world, suitable for both cooling and heating in hydronic systems.

Owner Benefits:

  • Minimum 12% annual saving on cooling/heating bills
  • wide range of sizes
  • Vertical or Horizontal installation possibility
  • Increases system lifespan
  • Retains sludge, rust and magnetite
  • Collects all impurities
  • Fight corrosion and stop further corrosion in the system
  • 5 Years Warranty

Installer Benefits

  • Available in DN50, Dn65, DN80, Dn100, DN125, DN150 and Dn200
  • Simple installation and servicing
  • Air vent port considered on the top of filter.
  • vertical and horizontal installation.
  • Construction conforms to Pressure Equipment Directive 97/23/EC

Technical Specification

Casing stainledd steel 304L
drain Cap G1/2, male
Maximum working pressure 10 bar
Working temperature range 0 to 100 degree of Celcius
ring Seal Silicone
Magnet Neodymium REN52 B=12000 Gauss B(max T) / B(room T)<1% (max T=120°C, Room T=20.5°C) Tested according to ASTM A977 regulations
Compatible fluid Water, Water+Glycol
Operation noise 0 db(A) According to EN13443